BEYOND-2001®

BEYOND-2001®, mixed with water at different concentrations, will remove contaminants associated with manufacturing processes.
Suggested mixtures range from 5% to 10%.
Use a suggested mixture of 5% to 10% for cleaning Oxygen related items.
The suggested mixtures for Support, Tear-Down, Repair and Overhaul cleaning processes will range from 10% to 50%.
We suggest heating the solution from 120° F., to 160° F., when removing petroleum-based oils and grease.
Heated solutions are not required for all cleaning applications. The cleaner is free rinsing and contains no known hazardous ingredients.

APPLICATION METHODS AND CLEANING SYSTEMS

TYPE OF CONTAMINANTS THE BEYOND-2001® WILL REMOVE

Oils	Lite Carbon and Burnt-in Carbon Deposits
Petroleum and Water Soluble Coolants	Cosmoline
Most Inks, Lay-Out-Dyes, Preservatives	Fluorinated Oils and Grease
Silicone Oils and Grease	Perfluorinated Grease and General-Type Contaminants

SPECIFICATIONS AND APPLICATIONS

WPAFB and Naval Air Warfare Center Aircraft Division approved the BEYOND-2001® to clean parts associated with their F-15 F-16, J-57 and F-18 Engine Simulators, Rocket Engines, Bearing Test Rigs, and Advanced Fuel Testing Apparatus.

ASTM F-483, a 10% Solution was tested on Magnesium Panels, the concentrated and 10% mixture showed no pitting or corrosion.

Adhesive Bonding tests showed the BEYOND-2001® as superior for removing Silicone Grease at 60 ° C and 25° C.

Compressed Gas Association (CGA/G-4) ASTM 121 and 122 Cleaning Effectiveness Specification for approved Oxygen Cleaner.

Cleaning Effectiveness and Compatibility Tests, (CASTM G121-93, ASTM G122-96, MIL-C87937B).

When tested to remove Burnt-in Carbon, Lite Carbon, Cosmoline, Oil, and General Grease associated with repair and overhaul, passed all Contaminant removal tests.